The ZBE250-BK150 consists of a ZBE250 chip type flake ice machine with a choice of two ice flake sizes, installed on top of an BK150 elevated bin and cart system.
The unit operates automatically, stopping when the bin is full and re-starting when ice is removed.
Chip type flake ice is made at -0.5°C so will not freeze together, making it ideal where no refrigerated storage is available.
The ice machine is a plug in unit and requires only connection to water and mains power supply. It is continuously rated and works fully automatically. No moving parts in the refrigeration circuit of the evaporator, hence no leaks due to rotating seals.
The hygienic sealed water system, boxed in construction and stainless steel panels makes this machine ideal for installation in factory environments where safety and hygiene are of paramount importance, especially when people may be working around the machine.
The BK ice storage is an elevated bin and cart system which has gravity assisted ice removal and castered cart to deliver substantial labour and safety benefits. The ITS is poly lined for maximum scale and chlorine resistance and bin access via sliding door. Exterior finish is stainless steel and the insulated ice cart is a hygienic moulded polyethylene with a removeable poly lid.
Each unit comes complete with bin, base, cart with lid and ice paddle.
Specifications
Cabinet: Stainless steel
Warranty: 2 years
Ice production (24hours): 250kg (guaranteed at 20°C air and 15°C water)
Ice storage 150kg (0.36m3) + cart (109kg)
Condenser: Air cooled (water cooling available on request)
Voltage: 240-1-50Hz
Control voltage: 240-1-50Hz
Shipping dimensions: (wxdxh) 3 pieces: (1.32 x 0.91 x 0.75m) + (1.32 x 0.91 x 1.22m) + (0.76 x 0.66 x 0.79)
Shipping weight: 3 pieces: 75kg + 91kg + 95kg
Power consumption: 1.1kW
Current consumption: 5.3A
Refrigerant: R404A (1.2kg)
Heat emission: 2.1kW
Noise level: 51dBA - 3m
Water connection: 3/4" BSP (minimum water pressure 2bar, maximum 6bar)
Overflow: 14mm ø.
Fuse: 13A
Cable cross section: 1.5mm2, Cu.
Machine Connections and Dimensions
A. Operating Switch
D. Electric cable/plug
E. Water connection
F. Overflow
G. Filter
H. Stop valve
J. Fuses
Weight of machine. 80kg
Weight of machine with bin. 240kg
Included with machine
Ziegra single water filtration kit
The Ziegra single helps prevent the water related problems that can impair the efficiency, reliablity and longevity of any ice machine.
Helps prevent the ingress of dirt and dissolved minerals which can coat evaporation surfaces, block lines and jam valves.
Water inlet connection hose
Water inlet hose to connect from the outlet of the Ziegra single water filter and the water inlet of the ice machine.
Large ice scoop
A large polymer scoop for hygienic handling of the ice
1 x Smartcart 240
109kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. Comes complete with separate lift off lid and drain
